2.4GPM Tankless Gas Water Heater
2.4GPM Tankless Gas Water Heater
24 months limited warranty
- 16.1" x 16.1"
- 18.1" x 16.1"
- 18.1" x 18.1"
My wife likes camping and staying at the camp but the one complaint she has with the RV she cant take more than a 5 min hot shower. So I started looking and saw that you can get LP instant water heaters. I said no way, so when i brought it to my wifes attention she said what are you waiting for, so we pulled the trigger. It has only been in a week and BOOM we have all the hot water we could ever want. Installation was a breeze, you basically pull out and put in. I took a little longer because I am a neat freak and I also decided to go ahead and put real on/off valves vs the plastic ones that came with the camper. All i can say if hot water is a problem for you, then you are nuts for not purchasing this furrion water heater. Mind blowing... OBTW happy wife now...
Just wanted to share my experience so far! We have had this heater 2-3 weeks now and I SCAVENGED the web for reviews but I see there are not nearly as many as there are for other tankless options due to this heater being a newer product on the market. I called Furrion due to the unavailability of the 16x18 panel (I had to fabricate my own due to a long back order 😭) and asked them about the heater and they said they have hardly had any issues with it on the customer support side of things which was a plus!
Anyway, it’s great so far! I live in Fl so we’re near Sea Level but it may not be ideal for anything above 5000 feet elevation according to Furrion (call them and find out) and it also does not have freeze protection (says Furrion) so don’t expect it to heat your water when it’s freezing outside unless you get a heated hose! Set the temp where you like: it’s hot out right now so I set it to 95 but it fluctuates to some extent so I mix in some cold and all is well. Might have to crank it up more during the colder months. Mixing in cold does NOT create any issues for us as the shutoff is at .3 gallons per minute. If you turn the water way down, expect it to shutoff. You don’t HAVE to leave it wide open for your whole shower unless you want to btw. You can turn the shower head off to lather if you want, the heater will kick off, and then you can turn it back on and then the heat will follow pretty closely (it’s a non-issue). LOVE NOT RUNNING OUT OF HOT WATER!!! Install wasn’t too hard but I’m an avid DIYer (and a former plumber) so if you don’t change your own brakes, you might need some help. I left my PEX crimper in another city so I bought 2 1/2” 20” braided supply lines and they are PERFECT for this job! The electrical is 12V NOT 120V so I ended up using the 12V power from the LP Gas switch (I tested it with my electrical tester from Harbor Freight) NOT the electric heater switch (that one is 120V). 2 of the 4 wires were no voltage. Read the manual and watch the Girard install (or Furrion if you can find it) and you’ll be fine!
If I ever need another tankless water heater or if asked to recommend a tankless water heater.
It is without doubt that I will recommend Furrion.
I had a problem from the moment I had it installed because the plumber inadvertently hooked the system up to a 120 volt instead of a 12 volt system.
Furrion sent another unit to replace the one that was not working.
I had never, ever, looked forward to doing the dishes.
Thank you for being there 😊
I installed this in my 2020 Forest River Rockwood 2104S. It fit perfect in the slot when I removed the factory 6 gallon hot water tank. The only issue I had was the hot water tank is on the back of the RV along the bottom rail of the trailer. I had to slightly cut the Furrion door to fit snug in the pre cut slot, it was simple and just used a dremel to cut off the parts needs and it fits perfect. This Furrion heater is shorter in depth, so I had plenty of room to access the back of the unit and attach the water lines. I had to buy some wire for the controller since it was about an 8 foot run from the heater to my controller which I placed in my bathroom.
This heater is awesome, I have used it on a recent trip where the outside temperatures were down to 15 degrees, the consistency of the water temperature has been great, I am now taking 20 minute showers and I haven't had a single issue with this tank. The water in the shower takes approximately 5 seconds to get to the temperature I set, while the sink takes maybe 8-9 seconds since it's a further run from the heater.
I would recommend this heater to anyone that wants to have unlimited hot water.
Game changer....... I installed mine today (1/4/21) and needless to say I took a one and a half hour shower right off the bat and I am amazingly satisfied with this unit as I live in my camper and I travel for work. I never have to worry about the kids running me out of hot water ever again and I never have to worry about running out a hot water from doing laundry and dishes and taking a shower. The install was quick everything bolted right back up with the existing plumbing in the existing propane fittings. My only complaint about the unit was the screws for the door we’re missing but I happen to have some spares that fit perfectly. And that being said there is a learning curve to the temperature setting to get it just right for you and something they don’t mention the knob on the unit it’s self is to control the water flow make sure it is at max and then you adjust the temperature using the touchpad. Right now I have mine at the hottest setting just for cleaning purposes with the laundry but it makes a difference in the shower having it at the hottest. Amazing......just amazing
First, the unit comes in 2 packages. The outside door in one and the heater in the other. Both were very well packaged and protected.
Now the surprise was the unit is tiny! The attachment flange fit completely in the hole the 10 gallon Suburban fit. I had to check the packaging to see if it was correct.. well, it is. I just furred the opening down to fit the smaller flange and went forth with the install.
No hardware to fasten the cover to the unit, but I needed to get an extension line for cold water inlet so no big deal, grabbed 8 stainless machine screws, washers and nuts. Minus one star for not including the hardware and minus one star for not including the wiring for the control panel.
First fire, within 2 seconds of tap being opened it fired up and within 3 seconds reached temp at burner. Turn off tap and 3 seconds to shut down.
Worked fine on a couple loads of laundry, a sink of dishes, and the Mrs took a 20 min shower.
First day, I like it! I will give it a bit of time and see if I feel I’d fully recommend it.
We have had both Atwood and Suburban tank and tankless heaters. Our last tankless was a 50k BTU that would make hot water but was sensitive to flow. This Furrion water heater makes all the other ones seem like gimmicks. It truly feels like a residential hot water shower. I wish we could have had this one years ago. Our current camp spot has tap water inlet of about 50 degrees but the Furrion outlet stays at a fairly constant 117 to 120 deg.
Some things not mentioned in the ad but be prepared for install:
You need to frame in your opening. I used a stick of 2x4 pressure treated to box in the 10 gal opening and a scrap piece of 2x12 pressure treated for the heater to set on. Make the 2x4 measure 16” square on the outside dimensions and the water heater will slide in perfectly.
You need about 6’ of butyl rubber tape to seal the water heater against your new frame. It is not included.
You will need a roll of blue wire for the control panel, 18 ga is sufficient, and appropriate wire nuts. The control panel has short leads. Even if you mount it downstairs you need blue wire. Length of roll depends on your RV but 25’ total was enough for me to run two 12’ wires upstairs to the bathroom. The polarity does not matter so both wires are blue. After some debate, I decided to mount the controller in the bathroom so that I can monitor or get a warning beep before it goes cold in case something malfunctions when I’m in the shower.
This magical piece of equipment fit PERFECTLY in the existing cutout for my Suburban 6gal water heater. Everything fit exactly as it should have, connections i had made some modifications to remove the bypass valve but also shorten the hot water pex to fit better and mainly to update the connections from T.T. to tank (plastic to brass) and my gas line was a hose so that made that part even easier. Disconnect old one, and put in new one. Took a couple hours to make sure it was done right and correctly and run control wires through the wall. I used some 18g THHN wire to extend the control wires and also to extend the 12v that was connected to the old unit. Turned switch on for old unit from electric to propane and BAM. Unit kicks on as soon as I turn hot water on, takes just a few seconds to warm up. As soon as I turn the hot off, the flame kicks off and its cools down. I now have taken 2 very comfortable long showers and I dont have to turn the water off to lather up! Im beyond sold! Worth every dang penny! Will NOT be going back to tank. There are absolutely no CONS to be said about this unit when connected to hook up sites. Boon docking may be an issue turning water off and on in shower as it will burst you with a shot of cold for a couple seconds but I rarely boon dock so yeah. I'm beyond thrilled! Thanks Furrion!
No short showers. Easy to install
Keeps the water hot!!! Love it!